KIM Report

The Stornoway without a Dion

Posted by David

To use an overused comparison in these current market climes, the diamond sector is the Rodney Dangerfield of mining stocks as it “don’t get no respect”. In this way, the diamond juniours are much like the official opposition (for the non-Canadian readers, Stornoway is also the name for the official residence of the leader of the opposition, currently Stephane Dion). To give a more focused discussion of the issue than did a previous article, presented is the case of Stornoway Diamonds (TSX-SWY).

 

The stock has been on a fairly steady decline since this time last year going from ~$1.20/share to about $0.37/share at current. Even the news that acclaimed diamond consultants – WWW International Diamond Consultants Ltd., had upped the estimated valuations for diamonds from the Renard kimberlites (Renard, together with the Lynx dykes, comprises the Foxtrot Property in Central Quebec, and is a 50/50 joint venture with SOQUEM Inc.) only caused a mere blip up from 0.35 to 0.43 that evaporated in the last two weeks.

 

In detail, the report displayed increased values for diamonds from Renard 2 and 3 (from U.S. $109/c to $121/c) and The North Complex Zone of Renard 4 ($69/c to $79/c), increases of 11% and 14% respectively. Since the pullback after the news, the stock has bounced around the mid thirty cent level. So what gives? The predominant idea here is that since last summer, most investors are still very wary of juniours, even ones with established and advance projects such as Foxtrot and, to a lesser extent, Churchill (joint venture with Shear Minerals). For Renard, the pre-feasibility study (NI 43-101 compliant) is due out sometime during this quarter and many investors may be waiting on that. The cost of a road to the potential mine site is one of the most speculated values.

 

Aside from Renard, the other properties in the Foxtrot property hold promise as well. The Lynx series of dykes produced a grade of 1.07 c/t from a 494 t bulk sample. Not enough sampling has been done to allow for a diamond valuation, but the sample did include a gem-quality octahedron weighing in at a whopping 21.53 c (pictured). A minibulk sample from the Hibou dyke, 1.3 km from the Renard bodies (see map), gave a grade of 1.26 c/t from 30.4 t of kimberlite. The largest stone from this sample was a 1.01 c octahedron.

 

After Renard, the next most advanced property is the Churchill project (JV with Shear Minerals), a series of kimberlite dykes located in the Churchill craton in Nunavut. This property was discussed the earlier Arctic Diamonds and Churchill articles.

 

SWY also holds a number of other advanced-level diamond prospects. The most promising of these is the group of eleven kimberlite bodies at Aviat on the Melville Peninsula, North of the aforementioned Churchill project. What really is really interesting about this project lately is the dense media separation results from January 2008 that reported a grade of 1.63 c/t from 20.6 t taken from the AV267 body, and included a 3.64 c stone. AV267 is a sheet-shaped body of macrocrystic hypabyssal kimberlite. Thus far, drilling has delineated AV267 to have an average thickness of 3 m and to extend at least 2000m along  strike and 500 m down dip (dip angle is 8-20 degrees). This is similar to the body at Snap Lake. Kahuna at Churchill is also similar in deposit shape, but it is a vertical sheet instead of the subhorizontal one at Aviat. The project began as a JV with SWY, BHP Billiton, and Hunter Exploration Group (a private firm). Last month SWY acquired BHP’s share of the project, making the split now 90% SWY and 10% Hunter. SWY also have 100% of the marketing rights for any Aviat stones.

 

SWY made news a couple of years back due to its aggressive takeover of Ashton Mining Canada. The main gain in this for SWY was the acquisition of Ashton’s share in the Foxtrot Project. SWY also gets a lot of press coverage because of its CEO, Eira Thomas, a celebrity in the diamond exploration industry due to her part in the discovery of the Diavik mine working for the then-juniour exploration company Aber Diamonds (now Harry Winston Diamonds). Her background and media appeal have made her popular with the press in an industry where companies are usually run by stolid old white guys. The acquisition of Ashton did not only add just properties to the company, but talent as well. Tom McCandless, a renowned and well-published specialist on North American diamonds (read Barren Lands by Kevin Krajick), stayed on with SWY as a consultant after the takeover and is now their chief mineralogist. Matt Manson, formerly VP marketing/technical services & control for Aber (now Harry Winston), came into SWY through the acquisition of Contact Diamond Corporation and is now company president.

 

In spite of these promising results and experienced management, SWY, like most diamond juniours, has been beaten into the ground. With the price at a severe low, investors will either shy away or look at the situation as a buying opportunity. SWY previously has been the focus of a lot of vitriol on investor bulletin boards such as www.stockhouse.com due to its aggressive takeover of Ashton, but shareholder crankiness aside, this is not the cause of the perceived downside.

 

SWY’s number one project is Foxtrot, specifically Renard. As a mine becomes more of a distinct possibility, the need for financing becomes impossible to ignore. Road and electricity access must be established, buildings erected, and equipment purchased. This will likely cost into the hundreds of millions of dollars. As of January 31^st, SWY had just under $18 million in cash and equivalents. Financing by dilution at current prices is unlikely, as management is a significant stockholder and do not want to see their equity devastated. That leaves turning to banks and the like for funds to construct the mine. The “subprime slime” that still sticks to financial institutions makes getting a loan far more difficult now than this time last year. However, considering the experience of the management and the premium nature of the properties, the choices made are likely to be in the best interests of the shareholders.

 

Disclaimer: The author holds 500 shares of SWY that he bought at $0.73/share and has only mildly freaked out about the price dropping to $0.37/share. This article is based on the personal opinions and experiences of the author. Please do your own due diligence when investing.

Churchill part 2

Posted by David

Now moving onto another Churchill, the Churchill craton, where Stornoway Diamonds and Shear Minerals have the Kahuna diamondiferous kimberlite, amongst others.

As I mentioned in an earlier post, the Kahuna body is a dyke. If we model the dyke as an ideal tabular body using the reported dimensions of 4 m width by 5000m strike, and assume a mining depth of 100m, this gives a mine-able volume of 2 million cubic meters.

Using the density of olivine (forsterite), a major constituent of kimberlite, as a proxy for kimberlite density at 3.27 tons per cubic meter, the above volume equates to approximately 6.54Mt.

The latest diamond grade reported from Kahuna in December was 0.95c/t. Thus this modeled body contains 6.213 million carats at a mining depth of 100m.

Unfortunately, no diamond valuation data for Kahuna has been released yet. The individual diamonds shown seem to be of fairly good size with no overall population distribution would indicate poor quality stones, such as the case at the Argyle mine, Australia. Also the possibility for large stones exists as a 5.43 c stone that was a fragment of an even larger stone (up to 14 c in possible size) was reported in November.

To give an idea of the value of the rock, (in USD$) at a low diamond value of $50/c, the diamonds contained in the modeled body would be worth over $310 million, at a better valuation of $100/c, the value would be double at over $610 million.

Note that Kahuna is but one of the properties in the Churchill project.

An earlier 2007 report read that the PST003 dyke gave a result of 2.04 c/t, and the Jigsaw and Notch bodies gave 0.39-0.8c/t.

So with the 2008 drilling season started it will be interesting to see if Shear and Stornoway can keep up the positive results that may help is pulling their stocks away from recent lows.